ZSOUND speakers audio system sound powered 2400W passive line array system 3way
Product Description
2400W 3way passive Line Array System
And this speaker uses neodymium drivers. Lightweight, MF&HF parts are coaxial structure to optimize the image. Rubber edge LF driver,
1) 2*12" rubber edge woofer,
1* high sensitivity 10" MF driver
2x75mm (voice coil) neodymium drivers.
2) The speaker is finished with black polyurea coatings, more resistant to climate.
4) VCL rigging hardware is made of high strength steel. It is safe enough to hand 16 enclosures together, as the safety factor reaches up to 7:1.
5) The enclosure is constructed by 18mm, 24mm birch plywood,
6) 4 recessed handle cups are mounted on both sides of the enclosure for easy lifting and carrying. A rear panel connector plate carries 2 Neutrik Speakon NL4MP connectors for loop in and loop out connections to the additional enclosure.
Applications:
Touring performance
Stadium
Theatre
Feature:
Large-scale,thri-amp,three-way line array system
Presettable angles
Neodymium high-sentivity driver, maximum headroom
rubber edge LF driver, extend low frequency
TECHNICAL SPECIFICATION | |
Frequency Response: | 50Hz-16KHz(±3dB) 40Hz-18KHz(-10dB) |
Nominal Coverage: | 90°(H)7.5°(V) |
Sensitivity (@1w/1m): | HF:113dB SPL MF:105 dB SPL LF:99 dB SPL |
Power Rating (AES): | HF/MF/LF:160W/350W/900W |
Nominal Impedance: | HF/MF/LF:16/16/16Ohm |
Maximum SPL: | HF135/141 dB MF:130/136 LF;128/134 dB |
Drivers: | LF 2*12"(75mm Voice coil)neodymium woofer; |
PHYSICAL DATA | |
Dimension (H*W*D): | 374*1030*565mm |
Weights: | 60kg |
Connectors: | 2*WP7 or NL8 connectors |
Speaker Cables: | 1-2+…LF 3-4+…MF 5-6+…HF |
Materials: | 18mm,24mm birch multi-plywood |
Finish: | Black polyurea coatings |
Grille: | Black epoxy mesh grille with acoustically reticulated cloth |
Rigging: | 0,1 ,2,3,4,5,6,7.5 degree adjustable |
SS2 sub-woofer utilize two brand-special and long stroke woofers, its voice coil and magnetic circuits is double of normal sub-woofers, its 1500W high power of each driver. There is no airflow noise which may occur in ordinary ones when working with ultra-high power.
SS2 is a vented enclosure,this design has excellent enhanced the vented tube’s output efficiency,increased the output of LF,and also decreased the non-linear distortion; And it effectively reduces temperature under high power and eases driver’s power compression. The unit resonance frequency is low to 26HZ with 30HZ enclosure tuning frequency which makes thick and elastic sound.
1500W (AES) LF driver
Thick and elastic hearing
Low frequency low to 28Hz
Mounted wear-resisting Nylon bar
Applications:
Touring performance
Stadium
Theatre
TECHNICAL SPECIFICATION | |
FREQUENCY RESPONSE: | 28 Hz ~ 180Hz (±3dB ), 23 Hz ~ 250Hz (-10dB ) |
NOMINAL COVERAGE (-6dB): | Omnidirectional |
SENSITIVITY(@1w/1m): | 101 dB SPL |
POWER RATING (AES): | 3000W |
NOMINAL IMPEDANCE: | 4 Ohm |
MAXIMUM SPL: | 136 dB (continuous) 142 dB (peak) |
DRIVERS: | LF 2x18 waterproof paper cone driver |
PHYSICAL DATA | |
DIMENSIONS(H x W x D): | 575 x 1240 x 680(mm) |
WEIGHT: | 90 (kg) |
CONNECTORS: | 2xWP4 connectors |
SPEAKER CABLES: | 1-2+ |
MATERIALS: | 24mm,30mm birch plywood |
FINISH: | Blackwater paint |
GRILLE: | Black epoxy mesh grille with acoustically reticulated cloth |
- Chamberconstant Temp&Humi Test: Simulation products in high humidity, low temperature, and different work stable state, through continuous experiment and improvement, indirectly improve product stability of working in different areas and different environment.
- Salt Spray Tester: The aging of the raw material and its protective layer is used to accelerate the corrosion resistance of the salt spray through the salt spray experiment.
Assess the corrosion resistance of the raw material and its protective layer. - Xenon Lamp Weathering Tester: Through the full spectrum of xenon arc lamp, to simulate the raw material in the oxidation of sunlight destructive waves, fade, crack, the change of the embrittlement, pulverization, and so on and so forth, through the experiment to evaluate materials durability.
- Vibration Test System: Simulate the environment of the product in the transportation process, test the product to withstand the turbulence, the vibration resistance performance, to improve the stability of the product.
- Drop Tester: Test the protection ability of free fall of product packaging, and test and improve the protective ability of product packaging by experiment.
Product Categories : Line Array System > 3-Way Line Array System
Premium Related Products